Wooden Door Lock Mortising Kit

First, remove the locating ring and put it aside, then remove the knife stick from the bracket. Place the knife rod stand on the slide rail workbench and fix the knife rod stand on the workbench by adjusting the screws. Turn the drill handle of the knife bar inwards, pierce it through the base cloth of the bracket, and then fix the trap. Take out the lock core, mark the height with a pen at the position where the door lock is stalled, and then mark the position of the keyhole with the lock core at the position of the door handle.

Install the assembled slotting machine on the door plate, align the knife head of the knife bar with the marked position of the upper and lower lock core, and then adjust the potioning screw to fix the upper and lower position to confirm the working area of the knife bar. Then mark the depth length of the lock core on the back of the cutter, and fix the positioning ring with a hexagon wrench. Finally, install the electric drill, hold the tool holder in your left hand, hold the power tool in your right hand, and push the tool at a constant speed. After drilling to a certain depth, slowly move out, and then move up at a constant speed in your left hand. When you reach the top, move down again at a constant speed, and slowly push the tool until the final completion.

The door lock opening kit is suitable for 1.38-3.94 inch thick wooden doors, copper and aluminum doors, stainless steel doors, and steel-wood doors. It is very suitable for families, decoration plants, repair plants, etc. to open new lock holes, side holes, eccentric lock holes, magnetic card lock holes, change password locks, fingerprint locks, cut mortices of lock bodies and panels, door hinge slots, etc. It is compatible with all electric drills with a clamping range of 0.39 inch, and is an ideal choice for carpenters, maintenance personnel, etc.

The combination of a solid locating ring, flexible bearing, positioning block, positioning screws, and ruler allow you to locate more accurately and easily, so as to better complete the drilling work. The smooth guide rail, linear bearing, 0.39 inch triangular clamping head, and widened adjusting angle can effectively maintain the stability and smoothness of the opening process, avoid exceeding the cutting area, and also provide a larger clamping range (1.38-3.94 inch).

The door lock opening kit is packaged with all the accessories required for installation and use, including the main body of the slotting machine, storage case, woodworking flat groove, adjusting screw buckles, tungsten steel blades, triangular chuck connecting rod, open-end wrenches, positioning block, set screws, universal adjustment screws, and a 30 cm/11.8 inch steel ruler. The aluminum alloy, steel, plastic, aluminum, tungsten steel, spray molding, electroplating, and chrome plating processes make this kit corrosion resistant, wear-resistant, and not easy to rust, so it can be kept beautiful and practical for a long time.

product information: